PC-DMIS Programmer For Hire — Live Remote CMM Programming

01 / What we do

Remote programming and live proveout, right on your Hexagon CMM.

We connect to your machine remotely, write the PC-DMIS program, and run it live — so what you sign off on is proven on your hardware, your fixtures, and your actual parts.

STEP 1

Remote-In Programming

A dedicated programmer connects securely to your Hexagon CMM and authors the full PC-DMIS program directly on your machine — no part shipping, no offline-only models that don't match the floor.

STEP 2

SolidWorks Modeling

No CAD model? No problem. Your programmer builds an accurate SolidWorks model from your print so the program is driven by true part geometry, not approximations.

STEP 3

Custom 3D-Printed Fixtures

We design and remotely print a part-specific poka-yoke fixture that seats your part the same way every time — repeatable setup with no dedicated tooling spend.

STEP 4

Live Proveout

We run the program on your actual machine and parts while you watch the screen share. You see every touch, every result, and sign off knowing it works.

STEP 5

GD&T & Print Analysis

We translate datum schemes, true position, profile, and runout callouts into correct measurement strategy — flagging ambiguous prints before they cost you.

STEP 6

Documentation & Handoff

Setup sheet, customized PC-DMIS report, thermal/heat check, and the finished program saved directly to your computer — ready for your operators to run.

02 / Who we serve

Tight tolerances across regulated and high-volume work.

Whether it's a safety-critical aerospace fitting or a high-cavitation medical run, the strategy is built around your tolerance stack and documentation needs.

Aerospace & Defense

Automotive & EV

Medical Devices

General Manufacturing

Precision Machining

Contract Inspection

03 / 3D Printing — Fixturing

Custom-printed fixtures that hold your part exactly right.

Every part gets a fixture designed for it — not a generic clamp. We model the holder around your geometry and print it remotely, so your part seats the same way every single run.

Custom 3D-printed poka-yoke fixture holding a machined part on a CMM

CUSTOM POKA-YOKE FIXTURE · IN USE

✓
Part-specific by design. Modeled around your geometry so it cradles the part with no rocking, shifting, or operator judgment.
✓
Poka-yoke seating. The fixture only fits one way — foolproof setup that gives you repeatable results part after part.
✓
No tooling spend. Printed in-house on demand instead of machined from metal — a fraction of the cost and lead time of hard tooling.
✓
Printed remotely, ready fast. We design and queue the print without setting foot in your shop — you just pull it off the printer and set it on the CMM.

3D-printed fixture with engraved revision and part number holding a part on a CMM granite plate

REVISION-CONTROLLED FIXTURE

Live CMM camera view of a part held in a custom fixture during remote proveout

LIVE CMM VIEW · REMOTE PROVEOUT

Threaded shaft held in a labeled, revision-controlled 3D-printed fixture on a CMM plate

LABELED & ORIENTATION-KEYED

04 / How it works

Our seven-step process — from emailed print to a proven program on your machine.

Email the print

Send your drawing straight to a dedicated programmer who owns your job start to finish — one point of contact, no handoffs.

We model the part

If you don't have a model, your programmer builds one in SolidWorks (typically 3–6 hours). Have a model already? We skip straight ahead.

Design a custom fixture

Your programmer designs a part-specific 3D-printed fixture to hold the part repeatably on your CMM — no generic clamping, no guesswork.

Print it remotely

We log into a Bambu Lab printer and print both the fixture and a model of the part — so everything's ready before proveout.

You drop it on the CMM

Pull the finished fixture off the printer and set it on your CMM as a poka-yoke fixture — it only seats one way, so setup is foolproof.

Live proveout on your CMM

Your programmer remotes in and proves out the program on your actual machine and parts while your team watches it run.

Documented & saved

You get a setup sheet, a customized PC-DMIS report, a thermal/heat check, and the finished program saved right onto your computer.

05 / Pricing

Try us on your first part — free.

New customers get a complete part programmed at no cost, so you can see our capabilities on your own machine before you spend a dollar. After that, it's one simple rate.

New customers

FREE

Your first part

We program a complete part end-to-end — modeling, fixture, proveout, and documentation — so you can judge the work before committing.

Full process, start to finish
Proven live on your CMM
No commitment, no risk

After your free part

$12/hr

Standard rate

One flat hourly rate for everything that follows — no tiered pricing, no surprise add-ons.

Same dedicated programmer
Modeling, fixturing & proveout included
Setup sheet & PC-DMIS report delivered

Ready to see it on your machine? Request your free first part →

06 / Get started

Request a quote.

✓

Nothing leaves your shop

We work on your machine — no parts shipped, no chain of custody.

✓

You watch it prove out

Live screen share — sign off on a program you saw run.

✓

Fixed pricing

You'll know the cost before any work starts.